PDA

View Full Version : My custom Magnafuel fuel system setup


BBGTO
09-14-2009, 11:01 AM
Still gotta put the whole trunk back together and mount the battery, but that'll be a while...big changes underway :secret:

Custom stock sumped tank
Magnafuel 4301 pump (1500hp)
Magnafuel boost-ref. regulator
Trick Flow inline filters
Summit 3/4" rails
Aeroquip hoses
-8 feed
-6 return

http://sincitygoats.com/gallery/d/20728-1/tn_IMG_2083.JPG
http://sincitygoats.com/gallery/d/20731-1/tn_IMG_2085.JPG
http://sincitygoats.com/gallery/d/20734-1/tn_IMG_2086.JPG
http://sincitygoats.com/gallery/d/20737-1/tn_IMG_2087.JPG
http://sincitygoats.com/gallery/d/20740-1/tn_IMG_2088.JPG
http://sincitygoats.com/gallery/d/20743-1/tn_IMG_2089.JPG
http://sincitygoats.com/gallery/d/20746-1/tn_IMG_2090.JPG

Lspwr
11-25-2009, 08:36 PM
I see you've been busy Matt. How long before your up and running?

Kjhallex
11-25-2009, 10:37 PM
I see you've been busy Matt. How long before your up and running?

Forever!! lol He ran into a few speed bumps... How's your build going?

BBGTO
11-26-2009, 06:29 AM
Speed bumps is an understatement. More like road blocks. :( Trying to find a way around those now. So yeah, prob a while longer...ha

Lspwr
11-26-2009, 08:55 AM
Forever!! lol He ran into a few speed bumps... How's your build going?

Speed bumps are what it's all about right? lol.
My build was/is going great. I got everything up and running, and was waiting to tune, but decided to wait on a nicer cam, and new heads first. Cam is here, heads should be ready in the next week or so. . . Depending on the funds available in the next month or so, I may build a nice forged shortblock over the winter as well.

mygto
11-26-2009, 09:47 AM
Looks like a great set-up. Keep posting pictures.

Jay GTO
11-27-2009, 10:31 AM
That's not too bad lookin

qwkgto
12-15-2009, 05:07 PM
Still gotta put the whole trunk back together and mount the battery, but that'll be a while...big changes underway :secret:

Custom stock sumped tank
Magnafuel 4301 pump (1500hp)
Magnafuel boost-ref. regulator
Trick Flow inline filters
Summit 3/4" rails
Aeroquip hoses
-8 feed
-6 return

http://sincitygoats.com/gallery/d/20728-1/tn_IMG_2083.JPG
http://sincitygoats.com/gallery/d/20731-1/tn_IMG_2085.JPG
http://sincitygoats.com/gallery/d/20734-1/tn_IMG_2086.JPG
http://sincitygoats.com/gallery/d/20737-1/tn_IMG_2087.JPG
http://sincitygoats.com/gallery/d/20740-1/tn_IMG_2088.JPG
http://sincitygoats.com/gallery/d/20743-1/tn_IMG_2089.JPG
http://sincitygoats.com/gallery/d/20746-1/tn_IMG_2090.JPG
what size feed line are you running to the pump?

BBGTO
12-16-2009, 05:11 AM
-8 feed to the pump from the tank. -8 feed from pump to both rails.

qwkgto
12-24-2009, 03:05 PM
-8 feed to the pump from the tank. -8 feed from pump to both rails.
Im not sure what HP your going for but the -8 out of the tank to pump is way too small,you need like a -10 at least -12 would be better to feed the pump,also what psi is that pump rated for the 1500hp,I went through this all before with my setups,had an aeromotive setup alot like what you have and the eliminator was good for high HP but at only 45 psi when my car went into boost I had the second pump come into play,but I was only seeing around 70 psi and my 80lb injectors were maxed at 20psi boost,yet my 80s should be good for 1250 or so hp,again not sure what your goals are just offering some advice.