Pontiac Valve Covers

[Robofuzz]

I'm thinking about working on cleaning up the look of my engine compartment. I like these valve covers from GM Performance Parts:

http://www.gastiresoil.com/attachment.php?attachmentid=989&stc=1&d=1299547010

The problem being, I would have to relocate my coils. Any suggestion as to how and where to relocate the coils?

[tom's2005gto]

http://store.katechengines.com/coil-relocation-kit-p13.aspx

http://www.nastyperformance.com/Valvecovers.html

[Robofuzz]

Mast has these side mount coil kits, too:
http://www.mastmotorsports.com/2010/news-view.php?id=70

[Kingsize]

Mast has these side mount coil kits, too:
http://www.mastmotorsports.com/2010/news-view.php?id=70

Dang! That's not a bad price at all!

[Robofuzz]

Well, after doing some research, I believe that I am going to have to come up with my own coil relocation scheme. There's a company on eBay that makes a universal coil mount that can be mounted anywhere. Plus Painless Performance makes a coil extension harness kit.

The Mast side mount kits require their valve covers or requires you to drill and tap your own valve covers. After talking with SDPC (they actually pulled a set of the Pontiac covers and looked at them for me), I am not really liking the idea of drilling the Pontiac covers.

So, I'm thinking of moving the coils to the frame rails or the engine bay side of the fender wells.

[Robofuzz]

http://www.gastiresoil.com/showthread.php?t=2492

[MannyLobo]

Quit showing off...

:wall:

[Robofuzz]

Quit showing off...

:wall:

:bat:

[svede1212]

Those look so much better than the FRCs.

[Robofuzz]

Those look so much better than the FRCs.
Thanks! It was a lot of work to relocate those dang coils, but I LOVE the results!