Heads/Cam guys drivetrain upgrades?

[PEETYZ]

Hey guys with heads/cam/intake etc setups (360-500rwhp) what upgrades did you make to ur drivetrain?

Im currently all stock 04 except 1 05/06 Gforce upgraded cv's halfshaft. The reason why i only installed 1 was because i wanted to limit wheelhop by changing the harmonics (like GM does with camaro and ZR1 etc) and it honestly is working well so far with the drag bags. If i break my stock o4 I will just put the other 05/06 Gforce upgraded one in.

Im looking to do some Gforce stubs in the future when i add more power and i get some more cash. I just wanted to see what setups you all were running? I don't plan on more than 440 rwhp Thanks in advance!

[Kingsize]

What you have done thus far sounds great and your future ideas are sound.

[ameaglemike]

Depending on the power, I'd recommend a GForce DS also. I believe Phoenix has one of their CF on his car, but I think that he also has one of their aluminum one pieces he wants to sell also, but don't quote me on that.

[walterd]

I have BMR stubs and axles with DSS shaft. I twisted a stub and then later sheared the bolts holding the driveshaft coupler at the front of the shaft. If you don't get a new driveshaft I would inspect(replace if cracked) the rubber couple and upgrade the bolts used to secure it.

[vv8]

Bmr halfshafts,bmr driveshaft,pedders serious street 2,bmr drag bags,trexilla stage 3 clutch.

1.84- 60'
8.26-1/8"
12.8-1/4 shifting at 6k

headers,tune,cai,exhaust

[wrp]

Monster Stage 3 and Monster Stage 5 prototypes.
GForce 1320 Tubs



GForce1320 33 spline spool
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/Turbo%20Whistle/TrailingArm1005.jpg


GForce1320 33 Spline Stubs
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/Turbo%20Whistle/TrailingArm1003.jpg


GForce 1320 half shafts


GForce 1320 Hubs
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/Turbo%20Whistle/TrailingArm1003.jpg


GForce 1320 trailing Arms
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/Turbo%20Whistle/TrailingArm1008.jpg


GForce 1320 CF DS and Yoke
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/Turbo%20Whistle/IMG00024.jpg


Koni Adjustable rear shocks, going to GForce mount with QA1 Coilovers
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/Turbo%20Whistle/SANY0022-1.jpg


BMR Drag Bags


BMR Subframe connectors


BMR DS Safety Loop


Lovell's 370 rear springs
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/SANY0001-4.jpg


Lovell's 90/10's
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/Turbo%20Whistle/SANY0047.jpg


SLP rear sway bar & Bushings


SLP Line Loc


C5 Ceramic pads


Baer slotted and drilled rotors


Holeshots all around with 29 inch tall by 14 inch slicks
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/SANY0001-2.jpg


750 foot pound rated rebuild on tranny with CF Synchronizers
http://i512.photobucket.com/albums/t327/wrpnEthyl/Mods/SANY0013.jpg

[GFORCE1320]

Dam WRP, you aint messing around ! :)

[csurane24]

I still can't decide what parts I want yet between Gforce and Hendrix but stubs, half shafts, and DS next summer. Already have a stage 5 4L60 from RPM due to the sock 4L60 couldn't handle more than 500 horse and it didn't make it off the dyno.

[wrp]

Dam WRP, you aint messing around ! :):thumbs: I'm pretty convinced a TH400 is going to be the way to go, I've been studying Lencos.

[PEETYZ]

I still can't decide what parts I want yet between Gforce and Hendrix but stubs, half shafts, and DS next summer. Already have a stage 5 4L60 from RPM due to the sock 4L60 couldn't handle more than 500 horse and it didn't make it off the dyno.

Few of my friends are running Gforce stuff and absolutly love them. I know when i get the money I will be buying a set of their stubs:cool:

[mattgallan]

what don't you guys powdercoat Monster green..lol

[hivoltagedriver]

Monster level 6 clutch, Tick Performance levle 2 T56 with cryo and REM polish, Gforce CF driveshaft, Harrops cover, and drag bags for now. Will be upgrading to Gforce stubs, half-shafts, lower control arms, and coil-over set up when funds allow.

[jmd]

i have done nothing but drag bags. when i had the procharger on my car making 650rwhp it had else done. the reason it lasts is that i do not drag race the car. i roll run from time to time .

[blown goat]

I put down 670. I put in a 3 1/2 inch drive shaft, and BMR hardened axles. They're rated for 800+hp. Also BMR sub chassis supports. Also a Centerforce DFX clutch. I am now looking for a Harrop cover, but dont have $450. to spend on it.